3.2 Install On A Pole
Find a pole with Ø35~50mm diameter. The pole is not included in the package. The typical installation is on a vertical pole. You can also install it horizontally.
L-Shape Bracket
The M6 cross-head screws are fixed on the backside of the router. Take them off and use the cross end on the T-wrench to install the L-shape bracket on the backside of the router.
Turn the bracket to be parallel with the pole if it's horizontal. The router antennas should keep in the vertical direction.
Bolts & Holders
Clasp the pole with the U-bolts and holders.
Attach them on either side of the L-shape bracket.
On another side of the bracket, put washers, spring washers, and hex nuts on U-bolts.
Use an M10 spanner to turn the hex nut and tighten the bracket on the pole.
Please refer to the above image of the installation on a vertical pole. Feel free to contact us if you have any questions about the installation.
Last updated
